By DekhoCampus Editorial ·

Class 12 capacitors in series and parallel: a solved 12 V example

Two capacitors can look like a simple addition problem until you mix up which quantity stays the same. For Class 12 Physics, decide that first: charge is the same in series; potential difference is the same in parallel. Then the equivalent

Class 12 capacitors in series and parallel: a solved 12 V example

If a Class 12 capacitor question gives two values and a battery voltage, start by drawing the connection. In series the charge on both capacitors is the same. In parallel the voltage across both is the same. That one decision prevents most wrong answers.

Use the connection before the formula

For series capacitors, add the voltage drops: V = V₁ + V₂. Their equivalent capacitance follows 1/Ceq = 1/C₁ + 1/C₂. For two capacitors, Ceq = C₁C₂/(C₁ + C₂). It must be smaller than either capacitor. If your result is larger, check whether you have used the parallel rule by mistake.

For parallel capacitors, both ends of each capacitor meet the same pair of nodes. Each sees the full supply voltage, and Ceq = C₁ + C₂. The total stored charge is the sum of the individual charges.

One 12 V example, solved both ways

Take 2 μF and 3 μF capacitors connected to a 12 V battery. In series, Ceq = (2 × 3)/(2 + 3) = 1.2 μF. The charge is Q = CeqV = 14.4 μC on each. Their voltages are V₁ = 14.4/2 = 7.2 V and V₂ = 14.4/3 = 4.8 V. The check is immediate: 7.2 + 4.8 = 12 V.

Connect the same capacitors in parallel and Ceq becomes 5 μF. Each now has 12 V. The individual charges are 24 μC and 36 μC; together they store 60 μC. These are different circuit arrangements, so do not carry the series charge into the parallel calculation.

How to check an energy answer

Use U = ½CV² when capacitance and voltage are known. For the parallel arrangement above, U = ½ × 5 × 10⁻⁶ × 12² = 360 μJ. For the series arrangement at the same total supply voltage, U = ½ × 1.2 × 10⁻⁶ × 12² = 86.4 μJ. Convert microfarads to farads before reporting the answer in joules.

What else belongs in this CBSE chapter?

The CBSE Class XII Physics syllabus for 2026-27 also names potential due to a point charge and dipole, equipotential surfaces, dielectrics and the parallel plate capacitor. It specifies formulae only, without derivation, for stored capacitor energy. Practise those concepts alongside combinations rather than treating this example as the whole chapter.

Keep the Electrostatic Potential and Capacitance study note open for a compact formula sheet and three self-checks. For circuit resistance, see the separate Current Electricity worked example; its series and parallel rules are different from the capacitor rules.